Installing The Power-Connector Port; Removing The Expresscard Cage - Dell Latitude E6230 Owner's Manual

4. Remove the power connector port.

Installing the Power-Connector Port

1. Insert the power-connector port in its slot.
2. Connect the power connector to the system board.
3. Install the:
a) base chassis
b) speakers
c) heat-sink module
d) heat-sink fan
e) bluetooth module
f) keyboard
g) palmrest
h) base cover
i) battery
j) ExpressCard
k) SD card
4. Follow the procedures in

Removing the ExpressCard Cage

1. Follow the procedures in
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat sink
i) speakers
j) base chassis
After Working Inside Your Computer .
Before Working Inside Your Computer .
41