For Fibre Subscribers:
For Fibre subscribers, please follow the instructions below in setting up your
device:
1. Plug one end of the Ethernet cable from the router's Ethernet port and
then plug the other end into the Ethernet port of your computer.
2. If you have another device that you need to connect into the router,
use another Ethernet cable. Plug one end of an Ethernet cable from
the computer's Ethernet port and then plug the other end into an
available Ethernet port in the router.
3. Using another Ethernet cable, plug one end of an Ethernet cable to
the WAN port of your router, and then plug the other end to the
available Ethernet port of your ONT.
4. Connect the power adapter from the router's 19V 1.89A DC port into
the power outlet.
1
3
4
2
Page 15 of 52
User Manual