Table of Contents
Advertisement
AXIS M2014–E Network Camera
Technical Specifications
Technical Specifications
Connectors
I/O terminal connector
4-pin terminal block for:
• Digital Input
• Digital Output
• Auxiliary power and ground (GND)
Function
GND
3.3 V DC Power
Digital Input
Digital Output
Pin
Notes
1
Ground
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3
Connect to GND to activate, or leave floating (unconnected)
to deactivate.
4
Internal connection to ground when activated, floating
(unconnected) when deactivated. If used with an inductive
load, e.g. a relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
48
Specifications
Max load = 50 mA
0 to +40 V DC
Max load =100 mA
Max voltage = +40 V DC
Advertisement
Table of Contents
