Axis M2014–E User Manual page 49

Network camera
Hide thumbs Also See for M2014–E:
Table of Contents

Advertisement

AXIS M2014–E Network Camera
Technical Specifications
Power connector
2-pin terminal block for power input.
Use a limited power source (LPS) with
either a rated output power limited
to £100 W or a rated output current
limited to £5 A.
Item
Function/group
Camera
Model
Image sensor
Lens
Light sensitivity
Shutter time
Video
Video
compression
Resolutions
Frame rate H.264
Frame rate
Motion JPEG
Video streaming
Image settings
Network
Security
Supported
protocols
DC power input
Specifications
AXIS M2014-E
Progressive scan RGB CMOS 1/4"
f=2.8 mm, F2.0, fixed iris, fixed focus
Horizontal angle of view: 81°
Vertical angle of view: 44°
Diagonal angle of view: 87°
1.0 lux – 10000 lux, F2.0
1/24500 s to 1/6 s
H.264 (MPEG-4 Part 10/AVC, Baseline profile)
Motion JPEG
1280x720 to 320x180
Up to 25/30 fps (50/60 Hz) in all resolutions
Up to 25/30 fps (50/60 Hz) in all resolutions
Multiple, individually configurable streams in H.264 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR H.264
Compression, color, brightness, sharpness, contrast, white balance, exposure value,
exposure control, exposure zones, backlight compensation, fine tuning of behavior at
low light
Rotation: 0°, 90°, 180°, 270°
Mirroring of images
Text and image overlay
Privacy mask
AXIS Corridor Format
Password protection, IP address filtering, HTTPS encryption*, IEEE 802.1X network access
control*, digest authentication, user access log
*This product includes software developed by the Open SSL Project for use in the Open
SSL Toolkit (www.openssl.org)
IPv4/v6, HTTP, HTTPS*, SSL/TLS*, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP,
ICMP, DHCP, ARP, SOCKS
*This product includes software developed by the Open SSL Project for use in the Open
SSL Toolkit (www.openssl.org)
49

Advertisement

Table of Contents
loading

Table of Contents