Table of Contents
Advertisement
AXIS M2014–E Network Camera
Shorten Camera Unit Cable
Shorten Camera Unit Cable
The camera unit is delivered with a 8 m (26 ft) cable.
To shorten the cable follow these steps:
1. Cut the cable to the desired length. Measure from the camera unit.
2. Strip the plastic outer coating from the end of the cable.
3. Peel back the shield.
4. Flatten the colored wires in the order described below.
1
Brown
2
White/brown
3
Not used
4
Not used
5
White/blue
6
Blue
5. Insert the wires all the way into a shielded 6P6C RJ12 connector. Make sure that the wires stay in the correct order.
6. Use a crimping tool to fasten the connector to the cable.
42
Advertisement
Table of Contents
