Table of Contents
Advertisement
AXIS M2014–E Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
•
Applications — use installed applications to trigger the rule, see Applications, on page 26.
•
Detectors
-
Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 24.
-
Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 24.
•
Hardware
-
Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
•
Input Signal
Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O
-
Ports, on page 39.
Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
-
the Live View Page, on page 10. This can for example be used to validate actions during product installation
and configuration.
•
Storage
Available — trigger the rule when the storage device is unmounted or removed. This can for example be
-
used to send maintenance notifications.
Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
-
overwritten to prevent the storage device from becoming full.
Locked — trigger the rule if the storage device is locked (write protected).
-
System
•
-
System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
•
Time
-
Recurrence — trigger the rule periodically, see Recurrences, on page 29. This can for example be used to upload
an image every 5 minutes.
-
Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 29.
Available actions include:
•
Output Port — activate an I/O port to control an external device.
•
Record Video — record video to a selected storage.
•
Send Images — send images to a recipient.
•
Send Notifications — send a notification message to a recipient.
•
Status LED — flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
27
Advertisement
Table of Contents
