lifeSMART LS-4W1500-X Owners Installation And Operating Manual page 8

This is normal. Although the heat cycles off, the fan stays on until the chamber is cool. If the
temperature falls below the desired set temperature during the time the fan is cooling, the heating
elements will cycle back on. This will not allow for the fan to completely cool off the chamber, and
shut down. The fan seems to run continuously. It is a safety mechanism to prevent overheating. The
best way to avoid this is to have the set temperature at least 5 degrees higher than the desired heat,
so that it retains that heat during the cooling cycle.
This is normal. The heater's fan's speed is not affected by the HI/LO settings. The fan is designed
to vent the heat at one soft, comfortable, and energy efficient speed. What is affected by the HI
setting is the heat output. In essence, in the HI mode, the heater produces "more" heat, rather than
"faster" heat.
The heater comes with an automatic 1 year limited manufacturer's warranty at the time of purchase.
Your receipt is considered your proof of purchase and registration. Keep it in a safe place. As long
as it is legible, a copy may be used for any future warranty claims (if requested). If you have access
to e-mail, and would like peace of mind, e-mail us to: Registration @lifesmartproducts.com. In the
body of the e-mail, include your full name, address, phone number, model, serial number, and
scanned copy of your legible receipt. Or you can register online on the registration tab of
www.lifesmartproducts.com.
There are many brands of heaters on the market. Each brand is designed with different heat
specifications, fan speeds, colors, material types, displays, and electrical components. They are
manufactured this way for you, as the consumer to have choices, selection, and preferences. As long
as the unit functions as specifications indicate, comparison to other brands will ultimately depend on
individual consumer perception.
The compact LIFESMART heater can definitely save you on heating costs, when compared to the
existing central heating system in place in your home, and when used as directed. Your heater is
designed to give your main heat source a supplement "boost," or allow for you to have extra heat (in
the form of soft infrared waves) in locations where you would otherwise be short. It is meant to cycle
on and off, and not specifically designed to be used as a single heat source, especially in larger
homes. If you intend on using it as a single heat source (which you may), expect the heater to 1) take
as much as 24 hours to heat the area, 2) stay on for longer periods of time (without cycling off) due to
heat loss, and 3) increased use time, and electric costs.
The heater's display is defaulted to read the temperature as Fahrenheit. If your heater is definitely
heating, but shows it is in the 20's, you probably have the setting to read your temperature in Celsius,
rather than Fahrenheit. See Users Guide to change.
8