Remote Control Overview; Installing The Batteries; Replacing The Batteries - EdgeStar AP8000W Owner's Manual

NOTE: Be careful not drop
the remote control. Do
not place the remote
control in a location
exposed to direct sunlight.

Installing the batteries

CAUTION: Use only AAA batteries. Remove the batteries if the remote control will not be used for one month or longer.
Do not attempt to recharge batteries not designed to be recharged. All batteries should be replaced at the same time.
Do not mix old and new batteries. Do not dispose of batteries in a fire as they may explode.
Portable Air Conditioner

Remote Control Overview

The remote control is used to operate all of your portable air conditioner's
functions.
Mode Button
Speed Button
Timer Button
Cancel Button
Button Function
Power Powers the unit on or off.
Mode Changes between cool, dehumidify and fan modes.
Speed Sets the fan speed between high, medium, or low.
Timer Used to enable the timer.
Cancel Used to cancel the timer.
Increases the set temperature or the time when the
Up
Timer is enabled.
Decreases the set temperature or time when the Timer is
Down
enabled.
Changes the displayed temperature between Celsius
ºC / ºF
and Fahrenheit.
1) Remove the cover on the back of the remote control.
2) Insert the batteries with the (+) and (-) ends pointing in the
correct direction.
3) Install the cover on the remote.
Power Button
POWER
Up and Down
Buttons
Celsius /
Fahrenheit Button
12