Table of Contents
Advertisement
Quick Links
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
IGS-8861
Retain This
Manual for
Reference
09-28-07
OWNER'S
MANUAL
IRON GRIP STRENGTH
OLYMPIC BENCH
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
IGS-8861
®
IMPEX
INC.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Impex IGS-8861
Summary of Contents for Impex IGS-8861
- Page 1 NOTE: Please read all instructions carefully before using this product IRON GRIP STRENGTH Table of Contents OLYMPIC BENCH Safety Notice Hardware Identifier IGS-8861 Assembly Instruction Parts List Warranty Ordering Parts Model IGS-8861 Retain This Manual for Reference 09-28-07 ® IMPEX INC.
-
Page 2: Table Of Contents
WARRANTY....................…………. 13 ORDERING PARTS..................………… 13 BEFORE YOU BEGIN Thank you for selecting the IRON GRIP STRENGTH IGS-8861 Olympic Bench by IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. -
Page 3: Important Safety Notice
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. - Page 4 WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Left Upright Beam. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown...
-
Page 5: Hardware Pack
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. - Page 6 HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
-
Page 7: Assembly Instruction
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Right and Left Upright Beams (#1 & #2) with a Cross Brace (#3) in the mid-span. Secure each end with two M10 x 4 ¾”... - Page 8 STEP 2 (See Diagram 2) A.) Slide the Sliding Block (#6) onto the Main Seat Support (#4). Thread a M18 x 5/8” Lock Knob (#47) into the selected hole to hold the Sliding Block in position. B.) Attach the Main Seat Support to the Cross Brace (#3). C.) Secure it from the rear of the Cross Brace with two M10 x 2 ¾”...
- Page 9 STEP 3 (See Diagram 3) A.) Attach the brackets at the end of the Backrest Supports (#32) to the pivot on the Sliding Block (#6). Align the holes on the Seat Support (#16) to the brackets on the Backrest Supports. Secure them together with one M12 x 7 5/8” Allen Bolt (#60), two 1”...
- Page 10 STEP 4 (See Diagram 4) A.) Insert two M10 x 2 3/8” Carriage Bolts (#56) all the way through the holes on the Leg Developer Holder (#5), then insert the two Bolts through the holes on the Main Seat Support (#4). Attach the Leg Developer Holder to the Main Seat Support. Secure them with the two M10 x 2 3/8”...
- Page 11 STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#28) to the Arm Curl Bracket (#34). Secure it with two M8 x 5/8” Allen Bolts (#61) and Ø 5/8” Washers (#65). Attach the Arm Curl Bracket to the bracket on the Arm Curl Stand (#17).
-
Page 13: Parts List
PARTS LIST KEY NO. DESCRIPTION Q’ty Right Upright Beam 1” Square End Cap Left Upright Beam Ø ¾” Cone-shaped End Cap Cross Brace 6” Arm Curl Handle Grip Main Seat Support M10 x 4 ¾” Carriage Bolt Leg Developer Holder M10 x 3 ½”... -
Page 14: Limited Warranty
® IMPEX INC. LIMITED WARRANTY ®" IMPEX Inc. ("IMPEX ) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option.
Need help?
Do you have a question about the IGS-8861 and is the answer not in the manual?
Questions and answers