Page 1
ATn nVB8 u s e r ` s g u i d e Important Export Restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S. Government and they fall under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce.
The NVB8 have a built-in IR for total darkness with indicator “ON” light within the FOV. The NVB8 are available with a wide range of image intensifier options to meet a wide ar- ray of specification requirements.
• To turn the unit off, push the button again by short press (less than 1.5 sec.). focusIng To focus the NVB8, first you will need to adjust Diopter adjustment the diopter. Simply turn the diopter clockwise until it stops.
NOTE: The front lens may be readjusted as you view objects at different distances. InfRA-RED IllumInAToR Infrared illuminators, or IR illuminators, are common for night vision. The IR light greatly enhances the performance of the NVB8 while remaining almost totally invisible to the naked eye. The NVB8 have a built-in IR with indicator “ON”...
• Keep lens cap/daylight filter on when not in use. • The NVB8 scopes are not harmful to the user or the environment. • Do not disassemble except to clean the front lens and eyepiece: it will void your war- ranty.
ATN, at its option, will ei- ther repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s li- ability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...