Completing Your Installation With Or Without A Light Fixture - Hunter ceiling fan Installation And Operation Manual

7 • Completing Your Installation With or Without a Light Fixture
Steps 7-1 – 7-3
Housing
Assembly
Screw
10
Step 7-4
Hunter Fan Company
Your Hunter fan comes with an optional light fi xture assembly.  is
feature gives you the option of installing the fan with OR without the
included light fi xture.  e steps below direct you whether or not you
are installing a light fi xture.
WARNING: Use only the light fi xture supplied with this fan model.
7-1. To attach the upper switch housing, partially install two housing
assembly screws into the switch housing mounting plate.
7-2. Feed the upper plug connector through the center opening of the
housing.
7-3. Align the keyhole slots in the housing with the housing assembly
screws.
7-4. Turn the housing counterclockwise until the housing assembly
Upper
screws are fi rmly situated in the narrow end of the keyhole slots.
Switch
Install the remaining housing assembly screw into the housing.
Housing
Tighten all three screws fi rmly.
7-5. If you want to install the light fi xture, proceed with step 7-6 on
page 12 now.
If you do not want to install the light fi xture, you need to
uninstall it now. See "Uninstalling the Light Fixture" on page 11.
Once you have uninstalled the light fi xture, continue with step
7-6.
CAUTION: Make sure the upper switch housing is securely
attached to the switch housing mounting plate. Failure to properly
attach and tighten all three assembly screws could result in the
switch housing and light fi xture falling.
42607-01 • 02/16/06