Hunter ceiling fan Installation And Operation Manual page 12

7 • Completing Your Installation With or Without a Light Fixture (Continued)
Steps 7-6 – 7-7
Lower Switch
Housing
Plug
Connector
Detail
12
Housing
Assembly Screw
Hunter Fan Company
7-6. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fi t together
one way. Make sure the connectors are properly aligned before
Plug
connecting them. Incorrect connection could cause improper
Connector
operation and damage to the product.
7-7. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.
If you are not installing the light fi xture, your installation is
complete. Otherwise, proceed with step 7-8.
7-8.  e last installation step when installing the light fi xture is to
install the glass bowl. See "Installing the Glass Bowl" on page 13 for
instructions.
42607-01 • 02/16/06