HP ProLiant DL370 Generation 6 Overview page 40

QuickSpecs
Memory
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel 1333
2 DIMM Per Channel 1333*
3 DIMM Per Channel 800
* Supported with ROM update via ROM Based Setup Utility (RBSU)
**2DPC: LV runs at 1066, Std voltage runs at 1333
***3DPC: LV/Std voltage runs at 800
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,
the maximum speed will be 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
Chnl 2
Chnl 3
Standard memory configuration (1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
1333 1333 1066
1333* 1333* 1066
800 800 800
18 DIMM SLOTS (9 per CPU node)
CPU1
slot # population order
1 G
2 D
3 A
4 H
5 E
6 B
7 I
8 F
9 C
DA - 13242 Worldwide — Version 58 — February 27, 2013
HP ProLiant DL370 Generation 6 (G6)
HP ProLiant ML370 Generation 6 (G6)
1333 1333 1066
1333* 1066/ 800
1033**
800 800*** n/a
CPU2
slot #
1
2
3
4
5
6
7
8
9
1066 1066 1333
800 800 1066
n/a n/a n/a
population order
G Chnl 1
D
A
H Chnl 2
E
B
I Chnl 3
F
C
1333 1333
1066 1066
n/a n/a
Page 40