Dell Latitude D505 Series Service Manual page 56

Palm Rest: Dell Latitude D505 Series Service Manual
Back to Contents Page
Palm Rest
Dell™ Latitude™ D505 Series Service Manual
CAUTION:
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm
rest; the display hinges pass through the back of the palm rest.
3. Remove the
4. Remove the three M2.5 x 5-mm screws labeled "circle P" from the top of the
palm rest.
5. Remove the M2.5 x 5-mm screw labeled "M2.5x5" from the metal shield.
file:///F|/Service%20Manuals/Dell/Latitude/d505/palmrest.htm (1 of 5) [2/28/2004 8:13:52 AM]
Before performing the following procedures, read the safety
"Preparing to Work Inside the
display assembly.
Computer."