Dell Latitude D505 Series Service Manual page 44

Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
Back to Contents Page
Display Assembly and Display Latch
Dell™ Latitude™ D505 Series Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
CAUTION:
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: You must remove the display assembly before you remove the palm
rest.
1. Follow the instructions in
2. Remove the keyboard.
3. Open the display assembly approximately 180 degrees, and support the display
assembly so that it does not open past this position.
4. Pull up on the pull-tab that is attached to the display cable connector to remove
the connector from the system board.
5. Release the display cable from the three display-cable routing clips.
file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (1 of 12) [2/28/2004 8:13:51 AM]
Before performing the following procedures, read the safety
"Preparing to Work Inside the Computer."