Pull-Tab On Bottom Flex-Cable Connector; Top Flex-Cable Connector; Display Connector; Inverter Connector - Dell Latitude D505 Series Service Manual

Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
4. Remove the eight M2 x 5-mm screws from each side of the display panel.
5. Lift the display panel, and rotate the display panel out of the display cover.
6. Press in both sides of the top flex-cable connector, and pull the top flex-cable
connector away from the display connector.
7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter
connector.

1 pull-tab on bottom flex-cable connector

2 top flex-cable connector

3 display connector

4 inverter connector

file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (10 of 12) [2/28/2004 8:13:51 AM]