Installing The Bwa Partner; Uninstalling The Bwa Partner - Huawei EchoLife BM325 User Manual

EchoLife BM325
User Guide
If
Step 1
Quit the BWA Partner.
Step 2
Disconnect the BM325 or the connector of the USB cable from the PC.
----End
If
Step 1
Double-click
Step 2
Stop running the corresponding hardware of the BM325 on the device manager.
Step 3
Disconnect the BM325 or the connector of the USB cable from the PC after the system
prompts that you can remove the hardware safely.
----End

2.3 Installing the BWA Partner

The BWA Partner is the program used to configure the BM325 parameters. To install the
BWA Partner, do as follows:
Step 1
Power on the PC.
Step 2
Use a USB cable to connect the BM325 to the PC.
Step 3
The system prompts that new hardware is found and prompts you to install the BWA
Partner.
Step 4
Install the BWA Partner according to the prompts.
Step 5
When you finish installing the BWA Partner, it displays
----End
After you install the BWA Partner, you need to set up the network connection manually.
For details, see section 4.3 "Connecting and Disconnecting Network."

2.4 Uninstalling the BWA Partner

You can uninstall the BWA Partner by two methods:
From the Program
Step 1
Quit the BWA Partner.
Step 2
Choose Start > All programs.
Step 3
Find the BWA Partner, such as BWA Partner.
Step 4
Select Uninstall.
Step 5
Uninstall the BWA Partner according to the prompts.
----End
Issue 01 (2008-05-31)
is not displayed on the system tray, perform the following steps:
is displayed on the system tray, perform the following steps:
on the system tray. The system prompts "Safely remove hardware."
Huawei Proprietary and Confidential
Huawei Technologies Co., Ltd
2 Installing the BM325
on the system tray.
Copyright © 2-3