Page 1
Internet experience on the go. This guide shows you how to set-up and connect to the internet with your Huawei Mobile Internet Key. For detailed information visit www.telusmobility.com/support or see the help menu of the Connection Manager on your computer.
Page 3
USB Connector 3 The LED light indicates if the internet It connects the Internet Key to a PC, key has found a network and if you have folds for safe transport, and rotates successfully connected to a mobile high to help you get the best signal. speed internet network.
Getting Your Internet Key Ready Install your TELUS SIM Card Slide the cover off by sliding it towards the usb connector. Insert the TELUS SIM card into the SIM card slot. Note: Ensure the beveled edge of the SIM card is aligned with the SIM card slot as seen in the diagram.
Inserting the microSD Card Insert the microSD card into the Internet Key, as shown in the following figure. Note: The microSD card is an optional accessory that can be purchased from a TELUS store. Do not remove the microSD or SIM card while the Internet Key is connected to ...
Page 6
Getting your Computer Ready The steps to install the Connection Manager depend on your computer’s operating system (OS). Follow the instructions below for your computer type. It is recommended you uninstall any existing programs used with a mobile internet key prior to completing the next steps.
Note: If the installation wizard does not automatically open, it can be launched manually. Navigate to HUAWEI > Connection Manager under "My Computer" and look for the Setup file. Double-click Setup.exe to open the setup wizard. Windows PC (Windows 8)
Page 8
After the program is installed, a shortcut icon for Connection Manager appears on the desktop. Remove the Internet Key and reboot your computer. The OS will automatically detect the new hardware and place the HUAWEI icon on the screen. Double click Connection Manager icon to launch the installation.
Step 3: Connecting to the Internet Congratulations, your Mobile Internet Key and computer are now ready for high speed internet access! Follow the steps below to connect to the internet. Double-click the on the desktop to launch the Connection Manager. The first time you connect you will be prompted to setup data volume limits.
Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. Select the corresponding hardware and then click Stop. When the message "It is safe to remove the device" appears, remove the Internet Key. Disconnecting the Internet Key from your computer (Windows 7) Click Disconnect in the Connection Manager.
Click in the Safely Remove Hardware and Eject Media in System tray. Choose Eject the CD Drive to remove Internet Key. Disconnecting the Internet Key from your computer (MAC) Click Disconnect in the Connection Manager. Close the Connection Manager. Choose the Connection Manager icon in the desktop. Press control and click the left mouse simultaneously.
Find the Connection Manager and double-click it to uninstall the Connection Manager. Uninstalling the Connection Manager (Windows 8) Go to the location of the software and choose the uninst.exe. Follow the on-screen instructions of the uninstallation wizard. Uninstallation may take several minutes. A progress bar will be displayed. After the program is uninstalled, a shortcut icon for Connection Manager disappears on the desktop.