Special Installations - Heath Zenith Motion Sensing 3-Way Wall Switch 6107 Owner's Manual

SPecial inStallationS

For single switch
installations, con-
nect the wall switch as
shown here.
If you want to have mo-
tion sensors at both
3-way switches, con-
nect them as shown
below. The minimum
wattage may increase
to 100 W for fluores-
cent and 50 W for in-
candescent lighting.
*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different loca-
tion, depending on the brand of your switch.
RED is used to represent the second wire between two standard three-way switches. This may not be the color
used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also
a RED wire on the 6107 switch. Check the instructions above closely and do not confuse the two.
SINGLE SWITCH INSTALLATION
BLACK
BLACK
FROM
POWER
OFF
SOURCE
6107
EXISTING LIGHT SWITCH CONFIGURATION
WHITE
FROM
POWER
*COMMON
BLACK
SOURCE
2 SWITCH INSTALLATION
FROM
WHITE
POWER
SOURCE
BROWN
BLACK
RED
OFF AUTO ON
(From
6107)
6107
RED (In Wall)
-8-
BROWN
RED
ON
AUTO
WHITE
WHITE WHITE
*COMMON
RED
(In Wall)
BLACK
WHITE
BROWN
BLACK
BLACK
RED
OFF AUTO ON
(From 6107)
6107
BLACK
WHITE
BLACK
WHITE
BLACK
595-4514-16