Heath Zenith Motion Sensing 3-Way Wall Switch 6107 Owner's Manual page 6

test For correct common Wire connection:
Leaving the jumpered switch in one position,
Move one end of the jumper
wire to the previously
unconnected terminal.
Remove the jumpered
switch from the
junction box.
Turn the power
off at the
circuit breaker.
Re-install the switch.
Turn the circuit
breaker back on.
flip the other 3-way switch on and off.
Lights
Yes
turn on
and off.
No
Lights
No
turn on
and off.
-6-
inStallation
Jumper is
correct. Go
to next page.
Flip the switch with the
jumper wire to the
other position.
Flip the unjumpered switch
on and off.
Jumper is
Yes
correct. Go
to next page.
595-4514-16