Using The Sleep Function; Radio Functions - Akai AMP110 User Manual

Snooze alarm
The default snooze time is: 5 minutes.
● To snooze the alarm, press the SNOOZE button (29) while the alarm
sounds. The alarm sounds again after the snooze time has elapsed.
● To stop the alarm, press the STANDBY button (16) while the alarm sounds.
The alarm is automatically set for the next day.
5.4

Using the SLEEP function

The default sleep time is: 90 minutes.
● To activate the SLEEP function, press the SLEEP button (33).
● To set the sleep timer (90/60/30/15/OFF), repeatedly press the
SLEEP button (33).
The appliance stops playing after the chosen time has elapsed.
● To check the remaining time, press the SLEEP button (33).
● To cancel the SLEEP function, repeatedly press the SLEEP button (33).
5.5

Radio functions

● Switch on the appliance. Select the tuner mode.
● To select the radio band (FM/AM), press the BAND button (20).
● To tune to the station of your choice, press the NEXT button (40) or the
PREV button (19) repeatedly until the frequency is found. Press and hold
the NEXT button (40) or the PREV button (19) for 2 seconds to search for
the next or previous station automatically.
● To switch between mono and stereo reception, press the ST/MO button (30).
To improve the reception of the FM frequency, extend the aerial
i
antenna. To improve the reception of the AM frequency, turn the
appliance.
Using the MEMORY function
This function is used to set a frequency as a preferred station. The appliance
can store 20 radio stations (FM-10/AM-10).
● Switch on the appliance. Select the tuner mode.
● Search for the desired frequency with the NEXT button (40) or the
PREV button (19).
● Press the PROG button (39).
AMP110
13