Table of Contents
Advertisement
● Press the NEXT button (40) or the PREV button (19) to set the desired
minutes.
● Press the CLOCK ADJ button (31) to store the setting and exit.
Setting the alarm time
Two time slots are available (ALARM1 and ALARM2).
● Select the required time slot:
•
To select ALARM1, press the corresponding button ALARM1.
The display (4) shows the time and flashes.
•
To select ALARM2, press the corresponding button ALARM2.
The display (4) shows the time and flashes.
● To select the alarm mode (TUNER/CD/USB/SD), press the FUNCTION
button (17) repeatedly until the desired alarm mode is set.
● Press the NEXT button (40) or the PREV button (19) to set the desired hour.
● Press the ALARM1 button (27) to store the setting.
● Press the NEXT button (40) or the PREV button (19) to set the desired
minutes.
● Press the ALARM1 button (27) to store the setting and exit.
● To view the alarm time, press the ALARM1 button (27).
5.3
Alarm functions
Setting the alarm mode
ALARM1 is available in the following alarm modes: (TUNER/CD/USB/SD).
ALARM2 is only available in the following alarm mode: BUZZER.
ALARM1
● Select the alarm mode (TUNER/CD/USB/SD):
•
To set TUNER as the alarm mode, select the required frequency
(AM or FM) using the BAND button (20).
•
To set CD as the alarm mode, insert a CD into the disc tray (9).
•
To set USB as the alarm mode, insert the USB device into the slot (6).
•
To set SD as the alarm mode, insert the SD/MMC device into the slot (11).
● Adjust the volume.
● Press the ALARM1 button (27). The display shows ALARM1.
● Set the alarm time. Read the paragraph "Setting the alarm time".
● To cancel the alarm, repeatedly press the ALARM1 button (27).
12
Advertisement
Table of Contents
