Table of Contents
Advertisement
4. ALARM RECORD RATE:
For an NTSC unit we provide many different speeds ranging from 0 to 60 frames per second, and
for a PAL unit the figures are from 0 to 50 F/S.
5. ALARM RECORD MODE:
The recording images of the specific channels are much needed when the alarm sensor or motion
detection is working. Each channel is provided with four levels of alarm record rates: NORMAL,
DOUBLE, INTERLEAVED, and EXCLUSIVE, and each provides a different specific gravity of
recording:
NORMAL: The alarm record priority is off.
DOUBLE: The recording images of the specific channels are doubled.
INTERLEAVED: Interleaves the images of the specific channels with the normal recording.
EXCLUSIVE: Only records the channels where the alarm sensor or motion detection has been
activated.
6. ALARM RECORD QUALITY:
Similarly enter and set each channel to record an alarm at qualities ranging from BEST, HIGH, and
STANDARD to BASIC.
7. SENSOR TYPE:
The alarm input in each channel can be set to a "SENSITIVITY" of from 0.1 to 0.8 seconds.
8. ALARM INPUT LINK:
Enter and set each channel to activate ( ON ) or deactivate ( OFF ) the three modes of "SENSOR",
"V ( VIDEO )-LOSS", and "ACTIVE".
SENSOR: An alarm is triggered when the sensor is touched.
V-LOSS: An alarm occurs when video is lost.
ACTIVE: Alarms which are activated while the motion detection function is operating.
9. ALARM OUT LINK:
Enter and activate ( YES ) or deactivate ( NO ) the three alarm output modes of "SENSOR",
"V-LOSS" and "ACTIVE" for the following : ALARM OUT 1, 2, and 3, BUZZER, MAIN and CALL
DISPLAYs, START RECORDING, and CALL FULL SCREEN.
10. RETURN
Go back to the previous page.
5.6.2 RECORD SETTING
This page enables you to set the recording rate and recording quality, and enables you to continue
recording if you set the "RECORD MODE" to "NONSTOP".
Quality
BEST
HIGH
Image Size
40KB
32KB
43
Compression ratio
STANDARD
BASIC
24KB
16KB
Advertisement
Table of Contents
