Channel - Sort; Channel Add/Delete - Samsung COLOR TELEVISION Owner's Instructions Manual

Channel - Sort

(depending on the model)
This operation allows you to
TV
change the programme numbers
From
To
of stored channels. This
Store
operation may be necessary
after using auto store.
◆ From: Channel number to
Move
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels,
TV
including those received via
Programme
Color System
cable networks. When storing
Sound System
Search
channels manually, you can
Channel
choose:
Store
- Whether or not to store each
Move
of the channels found
- The programme number of each stored channel which
you wish to identify
◆ Programme (Programme number to be assigned to a
channel)
◆ Color System: AUTO/PAL/SECAM/NT4.43/NT3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored)
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Sort
Channel mode
◆ P (Programme mode): When completing tuning, the
: P 1
: P--
broadcasting stations in your area have been
: ?
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
Adjust Return
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Channel - Add/Delete
You can exclude channels you
have chosen from the channels
you scanned. When you scan
Manual Store
through the stored channels,
: P 3
those you have chosen to skip
√ √
: AUTO
√ √
: BG
are not displayed. All of the
: 46MHz
channels that you did not
: C 1
: ?
specifically choose to skip are displayed during scanning.
Adjust Return
Select Added or Deleted by pressing the ENTER button
repeatedly.
Channel - LNA
This function is very useful in the
situation that the TV is used in
weak signal. LNA amplifies the
TV signal in the weak signal
area, but not noise.
◆ LNA (Low Noise Amplifier) setting is to be made for
each channel.
◆ If the picture is noisy with the LNA set to On, select Off.
◆ Depending on areas, factory mode of LNA will be set up
as On or Off.
(depending on the model)
TV Add/Delete
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
Move Enter Return
(depending on the model)
Channel
TV
Auto Store √ √
√ √
Manual Store
√ √
Add/Delete
√ √
Sort
√ √
LNA : Off
On
Move Enter Return
English - 4
Setup - Time
◆ Clock
TV
You can set the television
Clock
Sleep Timer
clock so that the current time
On Timer
Off Timer
is displayed when pressing
On Timer Volume : 10
the INFO button on the
remote control. You must
Move
also set the time if you wish
to use the automatic on or off timers.
➢
When pressing the "I" button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode.
➢
You can select these options simply by pressing the
SLEEP button on the remote control. If the sleep
timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television
switches to standby mode is displayed.
◆ On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
◆ On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the television.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer "On" mode and prevents overheating, which
may occur if a TV is on for too long.
Time
- - : - - am
: Off
- - : - - am Off
- - : - - am Off
Enter Return