Channel Add/Erase; Channel - Sort - Samsung CS-21A11MH Owner's Instructions Manual

AA68-03650A-00Eng_asia 5/10/05
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search before it
has finished, press the
MENU button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to "Channel - Sort". To exit without
sorting, press the MENU button.

Channel - Sort

This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Get user manuals: See SafeManuals.com
10:20 AM Page 4
Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each
of the channels found
- The programme number of each stored channel which
Channel
you wish to identify
√ √
Auto Store
√ √
Manual Store
√ √
Add/Erase
◆ Color System:
√ √
Fine Tune
√ √
Sort
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
➢
Select Enter Exit
P 1
◆ Sound System: BG/I/DK/M
471 MHz 48%
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
Exit
channel or the channel that you selected is received on
the screen.
◆ Prog.No. (Programme number to be assigned to a
channel)
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel
Sort
From : P 1
To : P--
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust
NTSC4.43 is a 'trick' playback mode used by
special VCR's to play PAL-recorded videos in NTSC
mode.
English - 4
Channel - Add/Erase
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to skip
are not displayed. All of the
Exit
channels that you did not
specifically choose to skip are displayed during scanning.
Select Added or Erased by pressing the œ or √ button
repeatedly.
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the
channel, as this is done
automatically during the search
and store operation. If however
the signal is weak or distorted,
you may have to fine-tune the
channel manually.
◆ Tune: You can obtain a sharp and clear picture and
good sound quality.
◆ Store: You can memorise adjusted picture or sound.
◆ Erase: You can erase adjusted picture or sound.
Channel
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : ?
Select Adjust Exit