Channel - Sort; Channel Name; Channel Add/Delete - Samsung COLOUR TELEVISION Owner's Instructions Manual

Channel - Sort

This operation allows you to
TV
change the programme numbers
From
To
of stored channels. This
Store
operation may be necessary
after using auto store.
◆ From: Channel number to
Move
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels,
TV
including those received via
Programme
Colour System : AUTO
cable networks. When storing
Sound System
Search
channels manually, you can
Channel
choose:
Store
- Whether or not to store each
Move
of the channels found
- The programme number of each stored channel which
you wish to identify
◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System:
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored)
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Sort
Channel mode
◆ P (Programme mode): When completing tuning, the
: P 1 -----
: P-- -----
broadcasting stations in your area have been
: ?
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
Adjust Return
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Channel - Add/Delete
Manual Store
You can exclude channels you
: P 3
√ √
have chosen from the channels
√ √
: BG
: 46MHz you scanned. When you scan
: C 1
through the stored channels,
: ?
those you have chosen to skip
Adjust Return
are not displayed. All of the
channels that you did not
specifically choose to skip are displayed during scanning.
Method:
ENTER ➜ .../† ➜ ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
œ/√ : You can obtain a sharp
and clear picture and good
sound quality.
.../† ➜ ENTER : You can reset
the setting.
continued... MENU : You can memorise adjusted picture or sound.
Add/Delete
TV
... ... More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
† † More
Move Enter Return
Fine Tune
P 1 0
Reset
Move
Adjust Return
English - 4
Channel - Name
Channel names will be assigned
TV
automatically when channel ... ... More
P 1 : -----
information is broadcast. These
P 2 : -----
P 3 : -----
names can be changed, allowing
P 4 : -----
you to assign new names.
P 5 : -----
† † More
Move
Method:
.../† : Used to select a letter or number.
œ/√ : Used to move to the previous or next letter.
ENTER : Used to confirm the new name.
Setup - Time
◆ Clock
TV
You can set the television
Clock
Sleep Timer : Off
clock so that the current time
On Timer
Off Timer - - : - - am Off
is displayed when pressing
On Timer Channel : P 1
the INFO button on the
On Timer Volume : 10
remote control. You must
Move
also set the time if you wish
to use the automatic on or off timers.
➢
When pressing the "I" button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode.
➢
You can select these options simply by pressing the
SLEEP button on the remote control. If the sleep
timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television
switches to standby mode is displayed.
◆ On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
Name
Enter Return
Time
- - : - - am
√ √
- - : - - am Off
Enter Return
continued...