Plug & Play Feature (Depending On The Model) - Samsung WS32Z40 Owner's Instructions Manual

Plug & Play Feature
When the television is initially powered on, three basic customer settings proceed
automatically and subsequently: setting the language, channel and clock.
1 If the television is in Standby mode, press the POWER button on the
remote control.
The message Start Plug & Play is displayed.
2 The Language menu will automatically appear after several seconds.
➢
The providing languages for the Language menu vary depending on the
region.
3 Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
The message Check antenna input. is displayed.
➢
If any language is not selected on the Language menu, the Language
menu will disappear about 30 seconds later.
4 Make sure that the antenna is connected to the TV.
Press the ENTER (
The Area menu is displayed.
5 Select your area by pressing the ▲ or ▼ button, then press the ENTER
( ) button.
The Search menu is displayed.
6 Press the ENTER (
The channel search will start and end automatically. After all the available
channels are stored, the Clock Set menu appears.
➢
Refer to "Storing Channels Automatically" on page 11.
7 Press the ◄ or ► button to move to the Hour, Minute, or am/pm.
Set these by pressing the ▲ or ▼ button.
➢
Refer to "Setting and Displaying the Current Time" on page 24.
◆
You can set the hour and minute directly by pressing the numeric
◆
buttons on the remote control.
8 When you have finished, press the MENU (
The message Enjoy your watching is displayed, and then the channel
which has been stored will be activated.
If you want to reset this feature...
1 Press the MENU (
2 Press the ▲ or ▼ button to select Setup, and then press the ENTER
( ) button.
The Plug & Play is selected.
3 Press the ENTER (
This feature starts with the message Start Plug & Play displayed.
(depending on the model)
) button to enter the language.
) button.
) button to start search the channels.
) button.
) button to display the menu.
) button again.
English - 9
Plug & Play
Start Plug & Play
OK
Enter Return
Language
English
Français
Türkçe
Move Enter
Plug & Play
Check antenna input.
OK
Enter Skip
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Move Enter
Search
P 1 C – –
Stop
Enter Skip
Clock Set
T V
Hour Minute
-- --
Move Adjust
Plug & Play
Enjoy your watching
OK
Skip
Skip
87 MHz
10%
am/pm
am
Skip