Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM
Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect to the "AUDIO-L" input connector on the panel (front or side).
If the mono sound comes out only from left speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
Mono (Normal use)
Mono
↔
NICAM
Stereo
↔
NICAM
Dual-I
Dual-II
→
NICAM
NICAM
Mono (Normal)
Dual-I
↔
Stereo
↔
English - 23
Mono
(Normal)
Mono
(Normal)
Mono
→
(Normal)
Dual-II
Mono
(Forced mono)