Using the LNA (Low Noise Amplifier) Feature
This function is very useful in the situation that the TV is used in weak signal.
LNA amplifies the TV signal in the weak signal area, a low-noise preamplifier boosts the
incoming signal.
1
Press the MENU (
2
Press the ▲ or ▼ button to select Channel, then press the ENTER (
button.
3
Press the ▲ or ▼ button to select LNA, then press the ENTER (
button.
4
Select Off or On by pressing the ▲ or ▼ button, then press the ENTER
(
) button.
5
Press the EXIT (
➢
Setting the LNA option to "On" may produce worse picture quality
◆
due to the current channel's signal condition. Hence, apply LNA On/Off
selectively according to the picture quality that is currently displayed.
Depending on areas, factory mode of LNA, will be set up as On or Off.
◆
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing
requirements.
1
Press the MENU (
2
Press the ▲ or ▼ button to select Picture, then press the ENTER (
button.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select the required option, then press the
ENTER (
) button.
Available options: Dynamic - Standard - Movie - Custom
5
Press the EXIT (
➢
You can also set these options simply by pressing the P.MODE (
) button to display the menu.
) button to exit.
) button to display the menu.
) button twice to select Mode.
) button to exit.
(depending on the model)
)
)
) button.
English - 15
T V
More
Fine Tune
LNA
)
Move
Enter
T V
More
Fine Tune
LNA
Move
Enter
T V
Mode
:
Size
:
Digital NR
DNIe Demo
Tilt
More
Move
Enter
T V
Mode
:
Contrast
Brightness
Sharpness
Color
More
Move
Enter
Channel
:
Off
Return
Channel
: Off
Off
On
Return
Picture
Dynamic
16:9
:
On
:
Off
:
0
Return
Mode
Dynamic
Dynamic
Standard
:
90
Movie
Custom
:
50
:
50
:
50
Return