Samsung CS-29Z40 Owner's Instructions Manual

AA68-03867A-06Eng_Ma/Afirc
COLOR TELEVISION
CS-29Z40/29Z45/29Z50/29Z57/29Z58
29U50/29U57
Owner's Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register

Control Panel

(depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1 Remote control sensor
2 Standby indicator
3 Power on/off
4 On-screen menu display
5 Volume adjustment
6 Channel selection
◆ You can use the 6 buttons to switch the TV on when it is
in standby mode depending on the model.
◆ The 5 and 6 buttons also have the same function as the
œ/√/†/... buttons on the remote control.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
All manuals and user guides at all-guides.com
2/20/08 6:26 PM Page 1

Connection Panel

➢
☛

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

Connecting to the SCART Input/Output

The SCART2 and SCART3 connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART2 is also used for equipment with an RGB
output, such as a video game device or video disc player.
(depending on the model)
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
cable television network
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
English - 1

Connecting to the RCA Output

The RCA6 6 connectors are used for equipment, such as a
recording VCR or audio system.

Connecting to the RCA Input

The RCA4 and RCA5 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA7 7 connectors are used for equipment such as a
or
DVD with component output.
Front (or Side) Panel
☛
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.

Connecting to the S-VIDEO Input

The 3 (S-VIDEO IN) and 1 (AUDIO-L/R) connectors are
used for equipment with an S-Video output, such as a
camcorder or VCR.
continued...
3 S-Video input
2 Video input
1 Audio input
AA68-03867A-06