Table of Contents
Advertisement
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM ®
XP 550S treadmill. The XP 550S treadmill offers an
impressive array of features designed to make your
workouts at home more enjoyable and effective. And
when you're not exercising, the unique XP 550S tread-
mill can be folded up, requiring less than half the floor
space of other treadmills.
For your benefit,
read this manual carefully
before
using the treadmill.
If you have questions after read-
ing this manual, call 1-800-4-MY-HOME ®(1-800-469-
4663).To help us assist you, please note the product
model number and serial number before calling. The
model number of the treadmill is 831.29675.1. The ser-
ial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the lo-
cation).
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Fan
Accessory Tray
Handrail
Storage Latch
Upright
Console
Pulse Sensor
Key/Clip
Reset/Off
Breaker
Walking Belt
Foot Rail
\
Power Cord
BACK
Rear Roller
Adjustment Bolts
Cushioned Walking Platform
for maximum exercise comfort
RIGHT SIDE
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 550s and is the answer not in the manual?
Questions and answers
The ****, display and incline work fine but as soon as I try to set a speed or raise the speed, the motor hits the belt and it immediately shuts down everything, ****, belt, motor and display completely, then it reboots and seems ready to try again.
The Pro-Form XP 550s treadmill motor hitting the belt and shutting down when adjusting the speed could be caused by a damaged or improperly functioning control system. According to the manual, failure to use a properly functioning surge suppressor could lead to control system damage, which may cause the walking belt to change speed unexpectedly, accelerate, or stop. Additionally, improper grounding or electrical issues could contribute to the problem. Checking the surge suppressor, ensuring proper grounding, and inspecting the control system for damage may help resolve the issue.
This answer is automatically generated
My treadmill is plugged in and when turned on it will not start. The switch is in the on position.
The Pro-Form XP 550s treadmill may not start even when plugged in and the switch is on due to the following reasons:
1. The power cord is not plugged into a surge suppressor, or the surge suppressor is not plugged into a properly grounded outlet.
2. The treadmill is plugged into a GFCI-equipped outlet, which is not compatible.
3. The key is not fully inserted into the console.
4. The reset/off circuit breaker has tripped. If the switch protrudes, wait five minutes and press it back in to reset.
This answer is automatically generated
How do I open it up to clean built up dust on the **** blades?