Rinse And Spin - Kenmore Extra Large Capacity Plus LAUNDRY CENTER Use And Care Manual

6,
7.
Turn the WATER LEVEL selector knob to the correct setting for
your wash load and the type of fabric being washed.
WATER LEVEL
MEDIUM LOAD
LARGE
o LOAD
SMALL
LOAD RESET
• Choose a load size that allows the load to move freely for
best fabric care. See "Loading."
• You may change the load size selection after the washer
has started filling by turning the selector to a different
setting.
Set the WATER TEMP selector to the correct setting for the
type of fabric and soils being washed.
WATER TEMP
This section describes the available wash cycles and will help
you make the best cycle selections for your wash loads. Each
cycle is designed for different types of fabric and soil levels.
• The washer pauses briefly throughout each cycle. These
pauses are normal. Refer to "Normal Washer Sounds" for
sounds you may hear during a wash cycle.
• Refer to "Understanding Washer Cycles" to learn what
happens during a wash cycle.
PUSH & TUR[_ CLOCKWISE TO SET PULL TO START PU3H TO STOP
_2ND RINSE
HEAVYDUTY NORMAL
SHORT 15 REGULAR
REGULAR.............. _ SHORT
SUPER ........ 1 5
I QUICK
HOT COLD 704
COID o o COLD
HAND
WASHABLES
_ 9
SHORT ............................................
6
DELICATE PERMANENT PRESS
WARM • _ WARM 100"
WARM
• AUTO TEMP CONTROL - Your laundry centers uses the
Auto Temp Control feature to electronically sense and
maintain a uniform water temperature by regulating
incoming hot and cold water. The cold wash is regulated
at approximately 75°F (24°C). The warm wash is
maintained at approximately 100°F (38°C).
Choose one of these automatic temperature control
settings to help eliminate undissolved detergent and
ensure consistent cleaning results.
• Use the warmest water safe for the fabric. Follow garment
label instructions.
Selecting Water Temperatures
Water Temp Use For
Hot Whites and pastels
111 °F (44°C) Heavy and greasy soils
or above
Warm Bright colors
90°-110°F Moderate to light soils
(32°-43°C)
Cold Colors that bleed or fade
70°-90°F Light soils
(21°-32°C)
NOTE: In wash water temperatures colder than 70°F (21°C),
detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the
surface of garments).
8,
Push in the Cycle Control knob and turn it clockwise to the
wash cycle you want. Pull out the Cycle Control knob to start
the washer.
To stop or restart your washer:
•
TO stop the washer at any time, push in the Cycle Control
knob.
• To restart the washer, close the lid (if open) and pull out
the Cycle Control knob.
Heavy Duty
Use this cycle to get up to 15 minutes of wash time for sturdy or
heavily soiled loads. Wash combines high speed agitation and
high spin speeds.
• Use the Super or Regular settings for heavily soiled and
sturdy fabrics.
• Use the Short setting for light soil and delicate fabrics.
2nd Rinse
Use this cycle to add a second rinse to your wash load. This
cycle uses high-speed agitation and a high spin speed. 2nd
Rinse is also helpful for clothes that you want to rinse and spin
only.
Normal
This cycle features high and medium agitation for cleaning
cottons and linens, and high spin speeds to shorten drying time.
For lightly soiled cotton and linen fabrics, use the shortest time
setting.
Permanent Press
Select up to 9 minutes of wash time. Wash combines fast and
slow speed agitation and slow spin speeds to reduce wrinkling.
• The Permanent Press cycle includes a load cooling
process that reduces wrinkling.
• When the timer reaches Pause, the washer will drain and
pause for approximately 2 minutes while some of the
wash water is drained and replaced with rinse water.
Delicate
The cycle features low-speed agitation for gentle soil removal
from delicate items. Low spin speeds minimize wrinkling. Use
this cycle to clean lightly to moderately soiled loads.
Hand Washables
This cycle features a series of brief, low speed agitations and
short soaks to gently clean special-care items. Low spin speeds
minimize wrinkling. Wash small loads. If items appear to be
floating (due to trapped air), stop the washer by pushing in the
Cycle Control knob. Push items down into the washer. Pull out
the Cycle Control knob to restart the washer.
20