Troubleshooting; Technical Service; Regulatory Information - Ace 3035466 (AC-6180) Owner's Manual

Decorative wireless chime

Hide thumbs

Table of Contents

Available languages

Chime does not sound:

• Make sure push button and chime codes are the same (See pages 3 and 4).

• Check orientation of push button battery (See page 4).

• Check charge of push button and chime batteries, replace if necessary.

Batteries seem OK, but the chime does not work when installed:

• Do not mount chime or push button on metal or near metal studs. This

reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to

move chime or push button off metal surface.

• Concrete floors may reduce range. Move chime away from floor.

• Try locating chime closer to push button.

The range of the wireless chime can vary with location, temperature and bat-

tery condition.

Please call 1-800-858-8501 (English speaking only) for assistance

If you experience a problem, follow this guide. You may also want to visit our

Web site at: www.hzsupport.com. If the problem persists, call* for assistance

at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004

ATTN: Technical Service

* If contacting Technical Service, please have the following information available:

Model Number, Date of Purchase, and Place of Purchase.

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry

Canada. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by

the party responsible for regulatory compliance could void the user's authority

to operate the equipment.

598-1074-02