Uncore Configuration; Onboard Devices Configuration - Asus P7H55-M User Manual

2.5.2

Uncore Configuration

The North Bridge Configuration menu allows you to change the advanced chipset settings.
Memory Remap Feature [Enabled]
[Disabled]
[Enabled]
Initiate Graphic Adapter [PCIE/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI/PCIE] [PCIE/PCI]
2.5.3

Onboard Devices Configuration

HDA Controller [Enabled]
Enables or disables the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Set the front panel audio connector (AAFP) mode.
Configuration options: [AC97] [HD Audio]
Realtek LAN [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
[Enabled]
[Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378]
[278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP] [ECP & EPP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP] or [ECP & EPP]. This item
allows you to set the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1]
[DMA3]
2-20
Do not allow remapping of memory.
Allows for the segment of system memory that was previously
overwritten by PCI devices to be remapped above the total physical
memory.
Enables the Realtek Gigabit LAN Boot ROM.
Disables the LAN Boot ROM.
ASUS P7H55-M/USB3