Apm - Asus P8P67 User Manual

3.5.7

APM

EFI BIOS Utility - Advanced Mode
Main
Back Advanced\
Restore AC Power Loss
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By PCI
Power On By PCIE
Power On By Ring
Power On By RTC
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
Power On By PS/2 Mouse [Disabled]
[Disabled]
[Enabled]
Power On By PCI [Disabled]
[Disabled]
[Enabled]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
3-22
Ai Tweaker
Advanced
APM >
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disables the Power On by a PS/2 mouse.
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Disables the PME to wake up from S5 by PCI devices.
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Monitor Boot
Power Off Specify what state to go to when
power is re-applied after a power
Disabled failure (G3 state).
Disabled
Disabled
Disabled
Disabled
Disabled
Exit
Tool
Chapter 3: BIOS setup