Asus P8P67 User Manual page 38

3. Marvell Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
•
•
2-22
The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is
not supported.
You must install Windows ®
hard disk drives.
When using hot-plug and NCQ, set the Marvell Storage Controller item in the BIOS
to [AHCI Mode]. Refer to section 3.5.7 Onboard Devices Configuration for details.
XP Service Pack 2 or later versions before using Serial ATA
Chapter 2: Hardware information