Dram Timing Control; Cpu Power Management - Asus P8P67 User Manual

DRAM Timing Control

The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.

CPU Power Management

The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU
model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel
[Disabled] The CPU runs at its default speed.
[Enabled] The operating system controls the CPU speed.
Turbo Mode [Enabled]
This item appears only when you set the Enhanced Intel SpeedStep Technology
item to [Enabled] and allows you to enable or disable the Intel
Technology.
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled] Disables this function.
The following three items appear only when you set the Enhanced Intel SpeedStep
Technology and Turbo Mode items to [Enabled].
Turbo Ratio [Auto]
Allows you to manually adjust the Trubo CPU ratio.
[Auto]
[Maximum Turbo Ratio setting in OS] All numbers of active cores will be set to one
[Maximum Turbo Ratio setting in BIOS] All numbers of active cores can be set to an
Maximum Turbo Ratio setting in OS [Auto]
This item appears only when you set the Turbo Ratio item to [Maximum Turbo Ratio
setting in OS]. Use the <+> and <-> keys to adjust the value.
ASUS P8P67
SpeedStep Technology (EIST).
®
®
All Turbo ratio are set by Intel CPU default
settings
single Turbo ratio in OS
individual Turbo ratio in BIOS.
Turbo Mode
3-9