Table of Contents
Advertisement
Multiple handset
Push-to-talk (PTT)
PTT to a group of handsets
When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls when two to
five handsets are registered, and a maximum of one-to-three calls when six or
more handsets are registered. The first four registered handsets will be eligible
to use this feature. Other handsets can only use PTT for one-to-one calls.
1.
To begin a PTT call to a group of handsets:
•
Press and hold PUSH TO TALK when the handset is not in use.
-OR-
•
Press PUSH TO TALK when the handset is not in use. Press TONE
#, or press
TO TALK.
Your handset displays Connecting to group... for a few seconds. When the
connection is made, both your and the destination handsets display Press
and hold [PTT] to talk and beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
2.
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset. While you are speaking, the handset displays
PTT To handset X (X represents the destination handset numbers).
Release PUSH TO TALK after speaking. All handsets beep once again. After
3.
the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination handsets can respond (see
Answer a PTT call on page 59).
4.
Press
OFF/
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE:
After PUSH TO TALK is released, the PTT call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
or
to highlight Group then press
CID
DIR
or
END
CANCEL
to end the PTT call. The handset displays
58
and
SELECT
or PUSH
Hide quick links:
Advertisement
Table of Contents
