Creating Your Own Programme (Programme Play) - Aiwa CSD-A500 Operating Instructions Manual

Creating your own
programme
(Programme Play)
You can arrange the playing order of up to
30 tracks on a CD.
Function switch
x
MODE
1
Set the function switch to CD.
2
Press MODE repeatedly in stop mode
until "PROG" flashes in the display.
3
Press . or > to select the track
you want to programme, then press
xENTER.
After showing the programmed track
and its playing order for a few seconds,
the display changes to show the next
playing order.
Programmed track
Playing order
Repeat this step.
4
Press u to start programme play.
ENTER
u
.,>
Next playing order
To cancel the programme
In stop mode, press MODE until "PROG"
disappears from the display.
To check the order of tracks
before play
In stop mode, press . or > repeatedly.
The track numbers appear in the
programmed order.
To change the current
programme
Clear the programme by opening the CD
compartment or changing the position of the
function switch, and then follow all the steps
again.
Tips
• You can play the same programme again, since
the programme is saved until you open the CD
compartment or change the position of the
function switch.
• You can record your own programme. After you
have created the programme, insert a blank tape
and press z to start recording.
GB
13