Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual for your Power-Pak dumbbells. ® • Before each use, examine this equipment for loose parts or signs of wear. Contact your local Bowflex distributor or ® vendor for repair information. •...
Damage to the product and possible personal injury can occur. • Do not try to disassemble your Dumbbell handles, or base assembly. The product is not designed to be serviced by the customer. Contact your local Bowflex distributor or vendor for service. ®...
Specifications Dumbbell Assembled Weight Approximately 22.7 kg (50 lbs) Stand Assembled Weight Approximately 5.4 kg (12 lbs) Features Handle grip Adjustment knob C, D, E Weight plates Fail safe hook Base...
Assembly Hardware Item Description Button Head Cap Screw M10 X 2 Flat Washer M10 Nut M10 Lock Washer M10 Parts Item Description Base Assembly Upright Cross Tube Tools (included) 14mm 17mm Installing the Dumbbells on the Stand Remove the dumbbell from its base before you attach the dumbbell base to the stand to make sure that the dumbbell does not fall during installation.
Doing so will damage the weight plates and/or the locking mechanisms, and can cause the weight plates to disengage (drop) from the handle without warning. This can cause serious injury, and will void the warranty. Inspect the dumbbells prior to each use. Do not use a dumbbell with worn or damaged parts. Contact your local Bowflex ®...
Page 7
If the dumbbell locking mechanism operates unsatisfactorily in the test procedure above, do the following: 1. Stop use of the product immediately until approved service is available. 2. Contact your local Bowflex distributor or vendor for service. ®...
Never attempt to disassemble the dumbbell handle or base assembly – the product is not designed to be user serviced. Doing so will void the manufacturers warranty. Contact your local Bowflex distributor or vendor for service.