Your Breadman - Breadman Cool Touch TR555LC Instruction Manual

TR555LC_IB_New_31-12-02 31/12/02 11:33 AM
TROUBLE SHOOTING
Symptom Possible Solutions
Display Window Make sure the machine is plugged in. If nothing appears in
shows nothing the Display Window, unplug and plug in again.
START Button Make sure the machine is plugged in.
doesn't start
If nothing appears in the Display Window, press
the machine
SELECT to choose your Baking Cycle. (You must select
a Baking Cycle before pressing START.)
If the baking area is too hot, the Breadman
because of an automatic safety feature. Remove the Bread
Pan with your ingredients, and wait until the Breadman
cools down — about 20 minutes — before starting a
new loaf.
Can't set the Timer If you selected either the Rapid Bake or Dough Cycle,
you should not use the Timer. This is because the
ingredients should be processed immediately for
these cycles.
After starting, the If the Bread Machine is too hot, it will not start because
Display Window of an automatic safety feature.
flashes "--H"
Remove the Pan and let the Bread Machine cool down
until "--H" disappears and the selection reappears.
You may then start the cycle.
The Bread Machine On preheating the colon (:) in the Time Display flashes
doesn't mix the and the Kneading Paddle will not move. There is a 4 - 5
ingredients min. rest period on some of the cycles in which there will
be no movement in the Pan for 4 - 5 min. If the
Kneading Paddle does not operate after this period of
time, check to see if the Kneading Paddle is engaged in
the machine correctly.
The Breadman ® stops This happens if you press the STOP Button, if you
unplug the machine, or if there is a power outage. In each
case, the Breadman
Discard the contents of the Bread Pan and start again
with new ingredients.
Page 9
will not start
®
®
® can't be restarted for this Cycle.
26

YOUR BREADMAN

®
5.
6.
7.
1. Removable Lid (P/N 21789) 8. Drive Shaft (inside)
2. Viewing Window 9. Power Supply Cord
3. Steam Vents 10. Heating Element
4. Bread Pan Handle 11. Oven Chamber
5. Bread Pan (P/N 20101)
6. Kneading Paddle (P/N 20102)
7. Control Panel
3.
4. 2.
8.
(inside)
9.
11.
10.
3
1.