Table of Contents
Advertisement
Performing
Adjusting the Sound to Your Taste
The unit lets you add reverberation or modify the brightness of the sound.
Adding Reverberation to the Sound (Ambience)
You can add a pleasant reverberation to the sounds of the unit, producing the impression that you are performing in a concert hall.
This effect is called Ambience.
1
3
1.
Press the [Ambience] button .
The [Ambience] button will light.
2.
While holding down the [Ambience] button, press the [–] [+] buttons .
The display will indicate the depth of the ambience effect values.
Screen
3.
To turn off the ambience effect, press the [Ambience] button once again .
The [Ambience] button will go out.
* It's not possible to specify the depth of ambience individually for each tone. The effect will be applied in the same way to each tone.
Adjusting the Brightness of the Sound (Brilliance)
You can adjust the brightness of the sounds played on the keyboard or played back by a song.
1.
Press the [Brilliance] button .
The [Brilliance] button will light.
18
2
Value
Explanation
Higher values apply deeper ambience.
1–10
* If you're using headphones and the Headphones 3D Ambience effect (p. 46) is set to "ON, " this lets you adjust
(default: 2)
the depth of the Headphones 3D Ambience effect.
1
3
2
Saving your settings
The unit's settings will revert to the
default values when you turn off the
power, but you can save them as
described in "Retaining the Settings
Even After Power-off (Memory Backup)"
(p. 39).
Advertisement
Table of Contents
