RotoZip Revolution Rev01 Owner's Manual page 7

Step 9
Round the right bottom corner and begin moving
the Zip Bit upward while applying light pressure
left toward the box until you meet initial upward
cut. Push tool switch to off.
These step-by-step instructions are generalized
to acquaint you with the Spiral Saw™ power
tool operation. After some practice, you may
develop a motion technique with which you are
more comfortable. However, you must always
begin the cut somewhat centrally, and MOVE
THE SPIRAL SAW POWER TOOL ONLY
COUNTERCLOCKWISE to take advantage of
the "hugging" action of the rotating Zip Bit along
the contours of the template. Remember to use
a smooth continuous motion.
Step 10
The completed box, executed quickly, neatly and
in a fraction of the time taken by other methods.
-12-
SCHEMATIC FOR REV01 MODEL
-13-