Important Information; Solving Problems - Uniden D1780 User Manual

Programming a Security Code
With the phone in standby, open the menu; select Ans.
Security Code. Use the number keypad to enter a two-digit security code
(01 to 99). Press
MEnu/sElEcT
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number
of messages in memory, and a help prompt. It beeps to let you know it's
waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
01 Repeat message
02 Play message
03 Skip message
04 Delete message
#
If you don't press any keys for 15 seconds, the system hangs up
and return to standby.

IMPORTANT INFORMATION

Solving Problems

If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.
General problems
No handsets can make or
receive calls.
when you're finished.
0 and immediately enter your
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
Possible solutions
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
Setup, then select
English - 17