Table of Contents
Advertisement
46
4.1 Quick Start (shooting untethered)
1. Connect a Leaf Credo digital back to the camera and install the
focusing screen if applicable.
2. Charge the battery (see page 12), then insert it into the back and
either a Li-Ion rechargeable battery pack or AA batteries into the
camera.
3. Insert a CompactFlash card into the Leaf Credo back.
4. Switch on the power to the back and camera and select a drive
mode.
5. Choose an exposure mode.
6. Select a focus mode on the camera body and lens if applicable.
7. Set the date and time (see page 21).
8. Set the ISO and White Balance (see page 24).
9. After shooting, transfer images into Capture One software from the
CF card using a card reader.
10. Edit images in Capture One and output as required.
Advertisement
Table of Contents
