General; Lock State; Lnb Over-Current; Fpga Loading Failed - Advantech SBD75e Series Installation And Operation Manual

Figure 4.9: Alarms and Warnings Monitoring Window

General

4.6.1
The following paragraphs detail the general alarms shown in Figure 4.9.
4.6.1.1

Lock State

Allows an alarm or warning to be raised if the demodulator is unlocked.
4.6.1.2

LNB Over-Current

Allows an alarm or warning to be raised if the LNB supply current exceeds the design limit.
4.6.1.3

FPGA Loading Failed

Allows an alarm or warning to be raised if one or more of the FPGA devices in the demodulator
fails to configure correctly.
4.6.1.4

SRAM2 Failure

Allows an alarm or warning to be raised if one of the SRAM devices on the demodulator board
fails to program correctly.
4.6.1.5

Board Temperature

Allows an alarm or warning to be raised if the temperature of the demodulator board exceeds
the user specified temperature limit.
4.6.1.6

FPGA Temperature

Allows an alarm or warning to be raised if the core temperature of one or more of the FPGA
devices exceeds the design limit.
SBD75e Series Demodulator Installation and Operation Manual
Web GUI Monitoring & Control
4-11