Table of Contents
Advertisement
Menu Item
Output X ISI:
Output X Mode:
Reconfigure:
When all of the options in Table 5.9 have been set:
1.
Select Reconfigure. The following screen is displayed:
Reconfigure?
ENTER = Confirm : CLEAR = cancel
2.
Select ENTER. The unit is reconfigured with the pending settings; this will cause a break in the
reception. All the pending settings are then stored and will be re-used if a power cycle
occurs. If the unit was not reconfigured then the pending settings are discarded if the unit is
power cycled or the user exits out of the CONFIGURE menu.
SBD75e Series Demodulator Installation and Operation Manual
Operations
This option is only selectable if DVB-S2 ACM is selected. Only select streams
with the correct ISI value. The range is 0 to 255.
This option is only selectable if DVB-S2 is selected. If Normal is selected then
just data is output, if TFrame is selected then whole Baseband frames are
output. This is used if post-processing is required.
This button will activate all the pending options described above.
Front Panel Monitoring & Control
3-9
Advertisement
Chapters
Table of Contents
