Table of Contents
Advertisement
This parameter sets-up the port for parallel port printing.
3.4
Hot Spots
Hot spots on the graphical representation of a MIL-3000FTX
graphic (Figure 3-2) are used to gain status of the device. Use
the mouse to highlight the selection (a block around the area
appears), and click on it to obtain the information. Hot spots
function the same way on all FastPorts.
The following describes the hot spots for the MIL-3000FTX.
Refer to the FastManage User's Guide for more information on
the hot spots.
• Traps: This selection alerts the user to any problem
associated with the device.
• Uptime: This selection informs the user of how long the
device has been running.
• Reset: When this hot spot is clicked on, a warning message
appears asking whether or not the user want to reset
FastPort. Select Yes to continue, No to stop.
MIL-3000FTX Series of FastPort Print Servers
Figure 3-4. Parallel Printer Setup Menu
Chapter 3
F
A
S
T
M
A
N
A
G
E
3-5
Advertisement
Table of Contents
