Table of Contents
Advertisement
FastManage for the MIL-3000FTX FastPort
Chapter 3 discusses FastManage-specific software, though,
only as it applies to the MIL-3000FTX series of print servers.
This chapter does not have detailed instructions. Refer to the
FastManage User's Guide for installation and configuration
information on the FastManage suite of software.
3.1
Overview of FastManage
The FastManage suite of software configures and manages
most SNMP-types of devices, including print servers, fax
servers, and stackable hubs. When the software is started, an
icon appears that represents each SNMP device discovered
(found) on the network. This section discusses the specific
icons for the MIL-3000FTX series.
3.2
Starting FastManage
There are two ways to start the FastManage suite of software:
• Discovery Application icon:
a. Start by double-clicking on the Discovery
MIL-3000FTX Series of FastPort Print Servers
Application icon (Figure 3-1). The system discovers
all of the SNMP manageable devices on the subnet.
C h a p t e r 3
F
A
S
T
M
A
N
A
G
E
3-1
Advertisement
Table of Contents
