Parts Of The System; The Receiver Front Panel - Dish Network DP111 User Manual

Chapter 2

Parts of the System

T R F
HE ECEIVER RONT
S C S
MART ARD LOT
This slot is for a future Smart Card. No Smart Card is included with this
receiver.
U D A
P AND OWN RROW
The UP and DOWN buttons change the channel on the receiver.
Note : You can display the
turning off the receiver and pressing either the UP or DOWN ARROW
button on the receiver front panel.
IR S IR B
ENSOR AND
The IR Sensor receives IR signals from the remote control. For information
on the IR Blaster, see page 35, Setting Up the Receiver to Control the VCR.
P B
OWER UTTON AND
The POWER button turns the receiver on and off. The light indicates that
the receiver is on.
: If your receiver stops responding to the remote control and front
Note
panel commands, press and hold the front panel POWER button for about 4
seconds. When you release the button, the receiver will reset.
P
ANEL
B
UTTONS
Important System Information
LASTER
L
IGHT
screen by
Page 5